next up previous
Next: About this document ... Up: LOW COST DIRECT MACHINING Previous: Summary

References

[1]
V. M. Lubecke, K. Mizuno, and G. M. Rebeiz, ``Micromachining for Terahertz Applications'', IEEE Trans. on Microwave Theory and Techniques, vol 46, No. 11, pp 1821-1831, November 1998.

[2]
M. Madou, ``Fundamentals of Microfabrication'', CRC Press New York, 1997.

[3]
R. McGrath, C. K. Walker, M. Yap, and Y. Tai, ``Silicon Micromachined Waveguides for millimeter-wave and submillimeter-wave frequencies'', IEEE Microwave and Guided Wave Letters, vol 3, 61, 1993.

[4]
C. K. Walker, G. Narayanan, A. Hungerford, T. Bloomstein, S. Palmacci, M. Stern, J. Curtin, J., ``Laser Micromachining of Silicon: A New Technique for Fabricating TeraHertz Imaging Arrays'', Astronomical Telescopes and Instrumentation, SPIE Symposium, Kona, Hawaii, 1998.

[5]
C. K. Walker, G. Narayanan, T. M. Bloomstein, "Laser Micromachining of Silicon: A New Technique for Fabricating Terahertz Waveguide Components", 1997, 8th International Symposium on Space Terahertz Technology, eds. Blundell and Tong, Harvard University.

[6]
T. W. Crowe, P. J. Koh, W. L. Bishop, C. W. Mann, J. L. Hesler, R. W. Weikle, P. A. D. Wood, and D. Matheson, ``Inexpensive Receiver Components for Millimeter and Submillimeter Wavelengths'', 1997, 8th International Symposium on Space Terahertz Technology, eds. Blundell and Tong, Harvard University.

[7]
Aerotech, Inc., Pittsburgh, PA 15238.

[8]
Westwind Air Bearings Ltd., Dorset, England.

[9]
Machinery's Handbook, 1996, Industrial Press.

[10]
TK20A Air Dryer, General Pneumatics, Ocala, FL 34474.

[11]
Wilkerson M30-04-F00 coalescing air filter, D. L. Thurott Inc., South Windsor, CT 06074.

[12]
Lovejoy Tool Co. Inc., Springfield, VT 05156.

[13]
J. F. Johansson, and N. D. Whyborn, ``The Diagonal Horn as a Submillimeter Wave Antenna'', IEEE Trans. on Microwave Theory and Techniques, vol 40, No. 5, pp 795-800, May 1992.

[14]
Astro-cut 2001 A, Monroe Fluid Technology, Hilton, NY 14468.

[15]
Surfcam v7.1, Surfware Inc., Westlake Village, CA 91362.

[16]
Erickson, N. R., and Tuoivinen, J., ``A Waveguide Tripler for 720-880 GHz'', Proceedings of the Sixth Int'l Symposium on Space Thz Tech., pp 191-198, Mar 1995.

[17]
G. Narayanan, C. K. Walker, H. Knoepfle, and J. Capara, ``Design Of Mixer Elements For The HHT 345 GHZ Heterodyne Array Receiver'', Proceedings of the Ninth Int'l Symposium on Space Thz Tech., pp 433-442, Mar 1998.


next up previous
Next: About this document ... Up: LOW COST DIRECT MACHINING Previous: Summary
Gopal Narayanan
1999-10-15